→Application : For measuring current, when the current exceeds
the setting range, the
controller stops the current.
→Wiring
Easily
→Overloading Protection
→Output relay will transfer to ON after time delay of 0.5
sec while current exceeds setting
current (2~7A). --- JOC-1
→Reset : Power off reset or excluding problem. --- JOC-1
→When current is over than setting, output relay will
transfer to ON after 0.5 sec duration
once current is less than set current, relay contacts switched to
its original position after
response time. --- JOC-2
→Socket base 8PFA
→Surface Mounting : 1N/O + 1N/C Separately
→Rated Voltage : 110VAC，220VAC
→Reset Time : 0.2 Sec Max
Model：JOC Series
