Company | Hot News | Product | Download | Distributor | Contact Us | Home
Maxtech Software
Automation Appliances
Control Instruments
Meters
Sensors Transmitter
Proximity Switch
Photo Sensor
Thermo-Couple Sensor
RTD Sensor
Temperature Probes
Compensating Lead Wire
Temperature and Humidity Transmitter
Signal Isolated Transmitter
Power Transducer
Thermocouple Simulator
Pressure Sensor
CO2 / CO Transmitter
Air Velocity Transmitter
Heaters
Electronic Control Component & Others
Hvac
Sensors Transmitter\Photo Sensor
  
Photo Sensor
 
Model:Amplifier Built-in Series 
  
Product details:
 Adobe Reader Download.

Products Information


UN-15R Series Amplifier Built-in Type Photo Sensor

 

Products Features
Amplifier built-in type : All models in the series are equipped with a sensitivity regulator.
                                    
The types of output include Light On and Dark On.
                                    
Operation indicator (Red) and power indicator (Green) are available.
                                    
The two directions of detect, vertical and horizontal.
→Models : UN-15R-N (NPN NO or NC)
                 UN-15R-P (PNP NO or NC)
→Sensing Distance : 15cm
→Detection Voltage : Reflex type
→Supply Voltage : DC10 to 30V (Ripple 10% max.)
→Current Consumption : 40mA max.
→Detecting Distance : 15cm (8x8cm white paper)
→Object : Transparent and opaque materials
→Differential Travel : Max. 20% of scanning distance
→Load Current : 200mA max.
→Rate of Operation : 100Hz max.(ON/OFF time: 5ms max.)
→Light Source : Infrared LED
→Output indicator (LED) : Light indicator (Red) , Power indicator (Green)
→Sensitivity : Single turn
→Connecting Method : Pre-leaded model or pre-leaded quick connector model
→Housing-material : ABS/Black
→Insulation resistance : Min. 20MΩ (500VDC megger)
→Dielectric Strength : 1,000VAC/1 minute
→Protection : IP65 IEC

Products Information


UN-30R Series Amplifier Built-in Type Photo Sensor

 

Products Features
→Amplifier built-in type : All models in the series are equipped with a sensitivity regulator.
                                    The types of output include Light On and Dark On.
                                    Operation indicator (Red) and power indicator (Green) are available.
                                    The two directions of detect, vertical and horizontal.
→Models : UN-30R-N (NPN NO or NC)
                 UN-30R-P (PNP NO or NC)
→Sensing Distance : 30cm
→Detection Voltage : Reflex type
→Supply Voltage : DC10 to 30V (Ripple 10% max.)
→Current Consumption : 40mA max.
→Detecting Distance : 30cm (8x8cm white paper)
→Object : Transparent and opaque materials
→Differential Travel : Max. 20% of scanning distance
→Load Current : 200mA max.
→Rate of Operation : 100Hz max.(ON/OFF time: 5ms max.)
→Light Source : Infrared LED
→Output indicator (LED) : Light indicator (Red) , Power indicator (Green)
→Sensitivity : Single turn
→Connecting Method : Pre-leaded model or pre-leaded quick connector model
→Housing-material : ABS/Black
→Insulation resistance : Min. 20MΩ (500VDC megger)
→Dielectric Strength : 1,000VAC/1 minute
→Protection : IP65 IEC

Products Information


UN-200D Series Amplifier Built-in Type Photo Sensor

 

Products Features
→Amplifier built-in type : All models in the series are equipped with a sensitivity regulator.
                                    The types of output include Light On and Dark On.
                                    Operation indicator (Red) and power indicator (Green) are available.
                                    The two directions of detect, vertical and horizontal.
→Models : UN-200D-N (NPN NO or NC)
                 UN-200D-P (PNP NO or NC)
→Sensing Distance : 200cm
→Detection Voltage :
Mirror reflex type
→Supply Voltage : DC10 to 30V (Ripple 10% max.)
→Current Consumption : 40mA max.
→Detecting Distance : 0.1~2m (with RF-39N)
→Object :
Φ30mm (opaque materials)
→Load Current : 200mA max.
→Rate of Operation : 80Hz max.(ON/OFF time: 6ms max.)
→Light Source : Infrared LED
→Output indicator (LED) : Light indicator (Red) , Power indicator (Green)
→Sensitivity : Single turn
→Connecting Method : Pre-leaded model or pre-leaded quick connector model
→Housing-material : ABS/Black
→Insulation resistance : Min. 20MΩ (500VDC megger)
→Dielectric Strength : 1,000VAC/1 minute
→Protection : IP65 IEC

Products Information


UN-200T Series Amplifier Built-in Type Photo Sensor

 

Products Features
→Amplifier built-in type : All models in the series are equipped with a sensitivity regulator.
                                    The types of output include Light On and Dark On.
                                    Operation indicator (Red) and power indicator (Green) are available.
                                    The two directions of detect, vertical and horizontal.
→Models : UN-200T-N (NPN NO or NC)
                 UN-200T-P (PNP NO or NC)
→Sensing Distance : 200cm
→Detection Voltage : Through-beam type
→Supply Voltage : DC10 to 30V (Ripple 10% max.)
→Current Consumption : 50mA max.
→Detecting Distance : 2m (with RF-39N)
→Object :
Φ8mm (opaque materials)
→Load Current : 200mA max.
→Rate of Operation : 80Hz max.(ON/OFF time: 6ms max.)
→Light Source : Infrared LED
→Output indicator (LED) : Light indicator (Red) , Power indicator (Green)
→Sensitivity : Single turn
→Connecting Method : Pre-leaded model or pre-leaded quick connector model
→Housing-material : ABS/Black
→Insulation resistance : Min. 20MΩ (500VDC megger)
→Dielectric Strength : 1,000VAC/1 minute
→Protection : IP65 IEC

Products Information


US-10R Series
Mini Built-in Pentagonal Photo Sensor For Amplifiers

 

Products Features
→Amplifier built-in type : All models in the series are equipped with a sensitivity regulator.
                                    The types of output include Light On and Dark On.
                                    Operation indicator (Red) and power indicator (Green) are available.
                                    The two directions of detect, vertical and horizontal.
→Models : US-10R-1
                 US-10R-2
→Sensing Distance : 10cm
→Detection Voltage : Reflex type
→Supply Voltage : 12 to 24VDC (Ripple 10% max.)
→Current Consumption : 40mA max.
→Detecting Distance : 10cm (8x8cm white paper)
→Object :
Φ30mm (opaque materials)
→Load Current : 200mA max.
→Switching Frequency : 100Hz max. (ON/OFF time: 5ms max.)
→Light Source : Infrared LED
→Output indicator (LED) : Light indicator (Red) , Power indicator (Green)
→Sensitivity : Single turn
→Dielectric Strength : 1,000VAC/1 minute
→Protection : IP65 IEC

Products Information


US-40R Series
Mini Built-in Pentagonal Photo Sensor For Amplifiers

 

Products Features
→Amplifier built-in type : All models in the series are equipped with a sensitivity regulator.
                                    The types of output include Light On and Dark On.
                                    Operation indicator (Red) and power indicator (Green) are available.
                                    The two directions of detect, vertical and horizontal.
→Models : US-40R-1
                 US-40R-2
→Sensing Distance : 40cm
→Detection Voltage : Reflex type
→Supply Voltage : 12 to 24VDC (Ripple 10% max.)
→Current Consumption : 50mA max.
→Detecting Distance : 40cm (8x8cm white paper)
→Object :
Φ30mm (opaque materials)
→Load Current : 200mA max.
→Switching Frequency : 100Hz max. (ON/OFF time: 5ms max.)
→Light Source : Infrared LED
→Output indicator (LED) : Light indicator (Red) , Power indicator (Green)
→Sensitivity : Single turn
→Dielectric Strength : 1,000VAC/1 minute
→Protection : IP65 IEC

Products Information


US-200D Series
Mini Built-in Pentagonal Photo Sensor For Amplifiers

 

Products Features
→Amplifier built-in type : All models in the series are equipped with a sensitivity regulator.
                                    The types of output include Light On and Dark On.
                                    Operation indicator (Red) and power indicator (Green) are available.
                                    The two directions of detect, vertical and horizontal.
→Models : US-200D-1
                 US-200D-2
→Sensing Distance : 200cm
→Detection Voltage : Mirror reflex type
→Supply Voltage : 12 to 24VDC (Ripple 10% max.)
→Current Consumption : 40mA max.
→Detecting Distance : 10cm (8x8cm white paper)
→Object :
Φ30mm (opaque materials)
→Load Current : 200mA max.
→Switching Frequency : 100Hz max. (ON/OFF time: 5ms max.)
→Light Source : Infrared LED
→Output indicator (LED) : Light indicator (Red) , Power indicator (Green)
→Sensitivity : Single turn
→Dielectric Strength : 1,000VAC/1 minute
→Protection : IP65 IEC

Products Information


US-500T Series
Mini Built-in Pentagonal Photo Sensor For Amplifiers

 

Products Features
→Amplifier built-in type : All models in the series are equipped with a sensitivity regulator.
                                    The types of output include Light On and Dark On.
                                    Operation indicator (Red) and power indicator (Green) are available.
                                    The two directions of detect, vertical and horizontal.
→Models : US-500T-1
                 US-500T-2
→Sensing Distance : 500cm
→Detection Voltage : Through-beam type
→Supply Voltage : 12 to 24VDC (Ripple 10% max.)
→Current Consumption : 50mA max.
→Detecting Distance : 40cm (8x8cm white paper)
→Object :
Φ30mm (opaque materials)
→Load Current : 200mA max.
→Switching Frequency : 100Hz max. (ON/OFF time: 5ms max.)
→Light Source : Infrared LED
→Output indicator (LED) : Light indicator (Red) , Power indicator (Green)
→Sensitivity : Single turn
→Dielectric Strength : 1,000VAC/1 minute
→Protection : IP65 IEC

Products Information


UY Series
Mini Built-in Pentagonal Photo Sensor For Amplifiers

  

Products Features
→Models : UY-10R-N / UX-30R-N
→Sensing Distance : 10cm / 30cm
→Method of detection : Reflex type
→Emission : Infrared
→Sensitivity : Single turn
→Operating voltage : 12 to 24 VDC Permissible ripple 10% max. (P-P)
→Current consumption : <15mA
→Output type : N series: NPN NO/NC
→Sensing object : Opaque
→Load current max. : 200mA
→Switching frequency : 80Hz
→Protection degree : IEC IP64
→Housing-material : Housing:
ABS

Products Information


UY Series
Mini Built-in Pentagonal Photo Sensor For Amplifiers

 

Products Features
→Models : UY-1MD-N
→Sensing Distance : 100cm
→Method of detection :
Mirror reflex type
→Emission : Infrared
→Sensitivity : Single turn
→Operating voltage : 12 to 24 VDC Permissible ripple 10% max. (P-P)
→Current consumption : <15mA
→Output type : N series: NPN NO/NC
→Sensing object : Opaque (50mm)
→Load current max. : 200mA
→Switching frequency : 80Hz
→Protection degree : IEC IP64
→Housing-material : Housing:
ABS

Products Information


UY Series
Mini Built-in Pentagonal Photo Sensor For Amplifiers

 

Products Features
→Models : UY-1MT-N
→Sensing Distance : 100cm / 200cm
→Method of detection :
Through-beam type
→Emission : Infrared
→Sensitivity : Single turn
→Operating voltage : 12 to 24 VDC Permissible ripple 10% max. (P-P)
→Current consumption : <25mA
→Output type : N series: NPN NO/NC
→Sensing object : Opaque (20mm)
→Load current max. : 200mA
→Switching frequency : 80Hz
→Protection degree : IEC IP64
→Housing-material : Housing:
ABS
Product Remarks:
 
 
  Copy Right © MAXTHERMO-GITTA GROUP CORPORATION All rights reserved.